Staple Finisher-R1 (Optional)
Check the location of the paper jam, and follow the procedure described below, while referring to the directions that appear on the touch panel display, to remove the jammed paper.
|
NOTE
|
|
The Staple Finisher-R1 is an optional product.
If there is paper in the output tray, remove the output paper before proceeding with this procedure.
|
1.
Remove any jammed paper protruding from the output tray.
|
IMPORTANT
|
|
Do not attempt to pull out the jammed paper by force. Doing so may damage the machine.
|
2.
Open the front cover of the finisher.
3.
Remove any jammed paper from the paper delivery guide.
 |
1. Open the paper delivery guide, holding it by the front tab. |
 |
2. Remove any jammed paper. |
 |
3. Close the paper delivery guide, holding it by the front tab. |
4.
Close the front cover of the finisher.
 CAUTION |
|
When closing the cover, be careful not to get your fingers caught, as this may result in personal injury.
|
|
IMPORTANT
|
|
After you have cleared all the paper jams, make sure to return all the covers to their original positions. Once you have removed all of the jammed paper, printing resumes.
|