Finished Stamp
The machine can print a stamp (approximately 1/8" (3 mm) in diameter) on the front side of scanned and sent originals.
For information on the optional products required to use this function, see "Optional Products Required for Each Function."
Vertical Placement
* Position at which stamp is applied
Horizontal Placement
* Position at which stamp is applied
|
IMPORTANT
|
|
Place your originals in the feeder. The finished stamp is applied to originals that are scanned from the feeder.
|
1.
Press [Scan and Send].
2.
Specify the destination → press [Options] → [Finished Stamp].
3.
Press [Close].
|
NOTE
|
|
If the stamp does not print correctly, see "Replacing the Stamp Cartridge (Duplex Color Image Reader Unit-G1)."
|