Special Dialing

Enter fax numbers as described below when the imageRUNNER ADVANCE 6275i/6265i/6255i is connected to an extension, or when you want to enter international fax numbers.

Calling an Outside Line from an Extension

When calling an outside line from an extension, the outside line access number (such as 0) is normally dialed before the fax number of the destination. In the same manner, when the imageRUNNER ADVANCE 6275i/6265i/6255i is connected to an extension, the outside line access number needs to be entered before fax numbers. You can also enter a pause time (i.e., the amount of time the machine waits after dialing the outside line access number when calling from an extension) together with these numbers.

International Dialing

You can enter a pause time (i.e., the amount of time the machine waits after dialing the international fax number) together with an international fax number.

NOTE
The pause time differs in length, depending on whether it is entered in the middle or end of a fax number.
The pause time entered in the middle of a fax number (lower-case p) can be set from 1 to 15 seconds. (See "Pause Time.")
The pause time entered at the end of a fax number (upper-case P) is set to 10 seconds long. (This length cannot be changed.)
Two or more pauses can be entered consecutively.
08KL-0W4