Saddle Stitch

[On], [Off]*

This setting enables you to bind a finished print job by stapling and folding the pages of a booklet in the center.

IMPORTANT
Please note that the memory of the machine can store up to 8,000 pages. When you send a secured document to be stored in the memory to be printed at a later time, and the memory is full (already reached its maximum capacity), your document will not be stored. The memory may be full because the machine is being used for other functions (such as storing a document in an inbox or storing a form) or other jobs, which use memory space.

IMPORTANT

Please note that the memory of the machine can store up to 8,000 pages. When you send a secured

document to be stored in the memory to be printed at a later time, and the memory is full (already

reached its maximum capacity), your document will not be stored. The memory may be full because the machine is being used for other functions (such as storing a document in an inbox or storing a form) or other jobs, which use memory space.

NOTE
This function can only be selected if the Booklet Finisher-G1 is attached to the machine. This function is not available if 'Booklet' is set to [Off]. If the print job contains only one sheet of paper, the paper will be folded but not stapled. The number of copies of a saddle stitched booklet that can be made at one time is limited as shown below:

Number of sheets in each booklet	Max. number of copies that can be printed
1 - 16 (16 lb bond to 21 lb bond (60 g/m2 to 81 g/m2)) 1 - 10 (22 lb bond to 28 lb bond (82 g/m2 to 105 g/m2))	15 (16 lb bond to 21 lb bond (60 g/m2 to 81 g/m2)) 10 (22 lb bond to 28 lb bond (82 g/m2 to 105 g/m2))