Finished Stamp
The machine can print a stamp (approximately 3 mm in diameter) on the front side of scanned and sent originals.
Vertical Placement
Horizontal Placement
|
IMPORTANT
|
|
Place your originals in the feeder. The finished stamp is applied to originals that are scanned from the feeder.
|
1.
Press [Scan and Send].
2.
Specify the destination → press [Options] → [Finished Stamp].
3.
Press [Close].
|
NOTE
|
|
If the stamp does not print correctly, see "Replacing the Stamp Cartridge (For the Color Image Reader Unit-E1)."
|