Adjusting Density Manually
When scanning, you can adjust the density to the most appropriate level for the original.
As an example, the procedure for selecting a mail box as the storage location is explained in this section.
1.
Press [Scan and Store] → [Mail Box].
2.
Select the desired Mail Box → press [Scan].
3.
Press [Density] → press 
or 
to adjust the density for the original.
or to adjust the density for the original.
4.
Press [OK].
|
IMPORTANT
|
|
For information on the modes which cannot be set in combination with this mode, see "Combination of Functions Chart."
|