Different Size Originals

This mode enables you to scan different size originals with the same widths (A3 and A4, or B4 and B5) or different widths (A3 and B4, or A4 and B5) together.

This mode can be set only when the DADF-AG1 is attached. (See "DADF-AG1.")

IMPORTANT
Take note of the following when placing originals with different width in the feeder. Set your originals against the back edge of the feeder. Use the following combinations of originals. Setting other combinations may result in damage to your originals. A3 and B4, B4 and A4R, A4 and B5, B5 and A5 The image may be distorted diagonally when scanned.

Press [Fax].

Specify the destination → press [Options] → [Different Size Originals].

Select the type of originals → press [OK] →[Close].

[Same Width]:	Press this key if you are placing originals with the same width.
[Different Width]:	Press this key if you are placing originals with different widths.

IMPORTANT
If you set the Scan Size setting to anything other than [Auto], all of the originals are scanned in the specified size. If you want to scan each original in its original size, make sure to set the Scan Size to [Auto]. If different size originals are placed in the feeder, make sure that they are of the same weight (paper type). If you set the Different Size Originals mode, the scanning speed may be slower than normal.

IMPORTANT

If you set the Scan Size setting to anything other than [Auto], all of the originals are scanned in the specified size. If you want to scan each original in its original size, make sure to set the Scan Size to [Auto].

If different size originals are placed in the feeder, make sure that they are of the same weight (paper type).

If you set the Different Size Originals mode, the scanning speed may be slower than normal.