Manual Feeder Cleaning
If originals that have been fed through the feeder have streaks or appear dirty, clean the feeder's rollers.
Clean the rollers of the feeder with a cloth dampened with water, and wipe them with a soft, dry cloth.
IMPORTANT
|
Spin the rollers while cleaning them.
|
1.
Clean the rollers of the feeder.
|
1. Pull the lever, and open the feeder cover.
|
2. Clean the rollers (a total of three places) inside the feeder cover.
|
2.
Clean the rollers inside the inner cover.
|
1. Open the inner cover, holding it by its tab.
|
2. Clean the rollers (a total of three places) inside the inner cover.
|
3.
Clean the transparent plastic area on top of the inner cover.
|
1. Clean the plastic area.
|
2. Close the inner cover, and then close the feeder cover.
|
CAUTION
|
When closing the covers, be careful not to get your fingers caught, as this may result in personal injury.
|
4.
Clean the feeder scanning area.
|
1. Open the feeder.
|
2. Clean the feeder scanning area.
|
5.
Clean the resin roller and the surrounding area.
|
1. Turn the resin roller while turning the feed dial.
|
2. Clean the area while turning the resin roller.
|
3. Close the feeder.
|
CAUTION
|
When closing the feeder, be careful not to get your fingers caught, as this may result in personal injury.
|