Manually Setting the Fax Options
If the machine is connected by unidirectional communication, you must set the fax options attached to and installed in the machine manually.
1.
Open [System Preferences] → click [Print & Scan] (or [Print & Fax]).
2.
Select the fax you are using → click [Options & Supplies].
3.
Click [Driver] → configure the options installed in the fax.
|
IMPORTANT
|
|
Be sure to select only those options that are actually installed in the fax.
|
|
NOTE
|
|
If you are using Mac OS X 10.7 or earlier, check that the driver corresponding to the fax you are using is selected for [Print Using]. For the driver name corresponding to your fax, refer to the Readme file.
|
4.
Click [OK].