Setting the Gamma Value for Remote Scans

You can set the gamma value to use when scanning colour documents into your computer through the Network Scan function. Select the gamma value most suited to your computer settings so that you can print the document from your computer with the optimal density.
This mode can be set when the Scan function is available for use. For information on the optional products required to use the Scan function, see "Optional Products Required for Each Function."
1.
Press .
2.
Press [Function Settings] → [Common] → [Scan Settings].
3.
Press [Remote Scan Gamma Value].
4.
Select a gamma value → press [OK].

NOTE
For more information on the Network Scan function, see "Scanner."
0CYK-084