Job Build

This mode enables you to scan originals that are too many to be placed at once, by dividing them into multiple batches. You can use both the feeder and the platen glass for scanning.

For information on the optional products required to use this function, see "Optional Products Required for Each Function."

Press [Scan and Send].

Specify the destination → press [Options] → [Job Build].

Press [Close].

Press

(Start).

NOTE
To cancel scanning, press [Cancel] or (Stop).

When scanning is complete, place your next batch of originals → press

(Start).

If you want to change the settings, change them before pressing

(Start).

You can press [Change Settings] to change the following settings:

Select Colour: See Switching the Colour Mode

Scan Size: See Specifying/Registering Scan Sizes

2-Sided Original: See 2-Sided Original

Density: See Adjusting Density Manually

Original Type: See Selecting the Original Type

After the last batch of originals is scanned, press [Start Sending].

IMPORTANT
You can change only those settings appearing in [Change Settings] while in the Job Build mode. You need to specify the necessary scan settings in advance. If you place your originals in the feeder, remove the originals from the original output area when the scanning of each batch is complete. The maximum number of pages that can be sent at one time is 999. When using [Job Build], a message appears to ask you if you want to send the job when 999 pages of originals have been scanned. If you select to send the job, the scanned 999 pages are sent. If you cancel the job, the scanned pages are not sent.

IMPORTANT

You can change only those settings appearing in [Change Settings] while in the Job Build mode. You need to specify the necessary scan settings in advance.

If you place your originals in the feeder, remove the originals from the original output area when the scanning of each batch is complete.

The maximum number of pages that can be sent at one time is 999. When using [Job Build], a message appears to ask you if you want to send the job when 999 pages of originals have been scanned. If you select to send the job, the scanned 999 pages are sent. If you cancel the job, the scanned pages are not sent.

NOTE
If you place different size originals into the feeder, set [Different Size Originals]. (See "Different Size Originals.") If you want to scan 1-sided originals with 2-sided originals and store them as 2-sided documents, divide the originals into 1-sided and 2-sided batches. For example, if the first batch consists of 2-sided originals, set [2-Sided Original]. Thereafter, you have to manually set or cancel [2-Sided Original] for each batch of originals that you scan.

NOTE

If you place different size originals into the feeder, set [Different Size Originals]. (See "Different Size Originals.")

If you want to scan 1-sided originals with 2-sided originals and store them as 2-sided documents, divide the originals into 1-sided and 2-sided batches. For example, if the first batch consists of 2-sided originals, set [2-Sided Original]. Thereafter, you have to manually set or cancel [2-Sided Original] for each batch of originals that you scan.