Registering Frequently Used Fax Settings

You can register up to four frequently used combinations of fax settings. By simply selecting a registered setting combination when it is needed, you can eliminate the need to configure the same settings every time you send a fax, such as if you frequently set the number of recipients to 5, set 2-sided original, and increase the sharpness when faxing. You can register the setting combinations as <Settings 1> to <Settings 18>.
<Fax>  <Favorite Settings>  <Register>  <OK>  <Settings 1> to <Settings 18>  Tap each setting and set the value  <Apply>  <Yes>  <Yes>  <OK>

<Settings 1> to <Settings 18>

Register frequently used combinations of recipients and fax settings as one of the modes. To edit the settings for a mode that has already been registered, tap <Edit/Delete>, select the mode, and edit the settings.

Settings

Configure your frequently used settings. Various Fax Settings

<Change Name>

Change the setting name.
If you want to delete a registered setting, tap <Fax>  <Favorite Settings>  <Edit/Delete> <Delete> tap the setting  <Yes>  <Yes>.
If you want to use a registered setting, tap <Fax>  <Favorite Settings>  tap the setting.
Registered settings are saved even when the machine is turned OFF.
You can change the settings of a mode after it is activated.
For any setting you have registered, you can later change any of its setting values other than the destination.
If a destination registered in a setting is deleted from the Address Book, it is also deleted from the registered setting.
Any editing in the Address Book of a destination in a registered setting is not applied to the registered setting.
14CE-034