Basic Copy Operations
1
Place the document(s). Placing Documents
2
Tap <Copy>.
3
Enter the number of copies using the numeric keys.
Enter a quantity from 1 to 999.
Press 
to cancel the entered quantity.
to cancel the entered quantity.
4
Specify the copy settings as necessary.
5
Press 
.
.Copying starts.
If you want to cancel copying, tap <Cancel> 
<Yes> . Canceling Copies
<Yes> . Canceling Copies
When placing documents in the feeder in step 1
The document is automatically scanned.
When placing documents on the platen glass in step 1
Depending on the copy settings you made, the screen for selecting the document size and paper source is displayed when copying multiple documents. Follow the procedure below.
|
1
|
Tap the document size.
 |
|
2
|
Tap the paper source that contain the paper you want to use.
 If the screen is not displayed, proceed to step 3.
|
|
3
|
Place the next document on the platen glass, and press
.Repeat this step until you finish scanning the entire document.
|
|
4
|
Tap <Start Copying>.
|
When the <Paper Size & Settings Mismatch> or <The memory is full. Scanning will be canceled. Do you...> message is shown in the display.
You can check the copy history, such as when or how many copies have been made. Press 
<Copy/Print Job> <Copy Job Log> Tap the copy document you want to check.
<Copy/Print Job> <Copy Job Log> Tap the copy document you want to check.
 |
When copying documents with text or images that extend to the edges of the pageThe edges of the document might not be copied. For more information about the scan margins, see Scan Area.
|
 |
|
If you always want to make copies with the same settings:
If you want to register a combination of settings to use when needed:
|