Installation/Settings Problems

See Common Problems also.
Icons in the description
   Problem with the wired LAN connection

Remote UI is not displayed.   

Are <Use HTTP> and <Use Remote UI> set to <On>?
Disabling HTTP Communication
Disabling Remote UI
If the machine is connected to a wired LAN, check that the cable is connected firmly and the IP address is set correctly, and then start the Remote UI again.
For how to check, see "Getting Started" Manuals Included with the Machine or Viewing Network Settings.

A connection to a network cannot be established.   

The IP address may not be set correctly. Set the IP address again.
Setting IP Addresses

You are unsure of the set IP address.   

Viewing Network Settings

A fax cannot be sent or received on an optical fiber line.   

The machine is compliant with use on analog lines. When using an optical fiber line or IP phone line, the machine may not work correctly depending on the connection environment or connected devices. In such a case, contact the provider of the optical fiber line or IP phone.

The machine dials up to an unintended connection destination (if a dialup router is connected to a network).   

If a dialup router does not need to pass broadcast packets, set the dialup router so that the broadcast packets will not pass. If the dialup router needs to pass broadcast packets, check whether the settings are correct.
If a DNS server is located in an external network, set the IP address to be connected, not the host name, even if connecting to the devices that are on the network that is connected to the machine.
If a DNS server is located on a network that is connected to the machine and the information about the devices that are connected to an external network is registered to the DNS server, check whether the settings are correct.
14E7-0A6