Scanning from the Machine

14E8-056
 
The sequence of "scanning a document and saving it to a computer" can only be done when scanning from the machine.

Before Scanning from the Machine

Before scanning from the machine, you must first configure settings for both the machine and a computer. Use the following steps.
Configuring the Machine
1
Start the Remote UI and log on in System Manager Mode.Starting Remote UI
2
Click [Settings/Registration].
3
Click [Network Settings]  [TCP/IP Settings].
4
Click [Edit...] in [WSD Settings].
5
Select the [Use WSD Scanning] and [Use Computer Scanning] check boxes.
6
Click [OK].
7
Restart the machine.
Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
Configuring the Computer
8
Open the printer folder. Displaying the Printer Folder
9
Click [Add a device] or [Add a printer].
10
Select the machine when it is detected, and click [Next].

Scanning

1
Place the document(s). Placing Documents
When scanning several documents, load them in the feeder.
2
Tap <Scan>.
3
Tap <Computer>.
4
Tap the destination.
A maximum of one computer can be connected.
5
Tap <Scan>.
6
Press .
Scanning starts.
To cancel, tap <Cancel>  <Yes>.
Other useful scanning functions
You can save scanned documents to a USB memory device or send them as e-mail attachments. The documents can also be saved to shared folders and file servers. You can accomplish these functions directly from the machine.
Scanning Documents Directly to USB Memory
Sending Documents as E-mails Directly from the Machine
Saving Documents Directly to a Shared Folder/File Server

Find manuals for other products
imageRUNNER C1325
User's Guide (Product Manual)
USRMA-0144-022019-08Copyright CANON INC. 2019