Copying an ID Card
Copy a 2-sided card onto one side of paper.
1
Place a card on the platen glass, and then close the feeder.
Place the card with spacing of 1/4" (5 mm) from the left edge of the platen glass.
Align the center of the card with the arrow mark, as shown below.
To place the card horizontally
|
|
To place the card vertically
|
|
2
Press [
].
3
Select <N on 1> using [
] or [
] and press [OK].
4
Select <ID Card Copy> using [
] or [
] and press [OK].
5
Press [
] (Start).
Proceed to the next step when the scan is complete.
6
Turn sides.
Place the card with spacing of 1/4" (5 mm) from the left edge of the platen glass.
Align the center of the card with the arrow mark, as shown below.
To place the card horizontally
|
|
To place the card vertically
|
|
7
Press [
] (Start).