Relocating the Machine

See "Attention (Relocating the Machine)" in advance.
Follow the steps in the procedure below to relocate the machine somewhere else for maintenance and other purposes.
1
Turn the power OFF, then disconnect the cables and cord from the machine.
<How to remove the cables and cord>
USB cable*
(2) Turn the computer off.
(3) Remove it from the machine.
LAN cable*
(4) Remove it from the machine.
Power cord
(5) Unplug the power plug from the AC power outlet.
(6) Remove it from the machine.
Telephone cables*
(7) Remove it from the machine.
*
Whether the cable is connected or not varies depending on your environment.
2
If you are using the multi-purpose tray, close it.
3
Pull out the paper drawer.
4
Carry the machine to the new installation site.
After making sure that the cover and tray are closed, hold the handle on the front to lift and transport the machine. Check the weight of the machine so it can be carried safely.
When the optional paper feeder is installed
Remove the paper feeder from the machine, install it in the new installation site, then transport the machine.
Do not carry the machine with the paper feeder installed. If you do so, the paper feeder may drop, resulting in personal injury.
5
Put the machine down carefully at the new installation site.
NOTE
Installation procedures
See the Starter Guide that came with the machine.

When transporting the machine long distance

To prevent damage to the machine during transport, perform the following.
Remove the toner cartridges
See also "Storing Toner Cartridges."
Securely pack the printer in the original box with packing materials
If the original box and packing materials are not available, find an appropriate box along with packing materials and pack the machine and the parts appropriately.