Setting the IPv4 Address

Before setting the IP address, see "Attention (Setting the IPv4 Address)."
By default, the IPv4 address is obtained automatically.
Follow the steps in the procedure below to change the IP address setting.
1
Press [] (Menu).
2
Select <Network Settings> using [] or [], and then press [OK].
When the system manager ID and system manager PIN are specified
Use the numeric keys to enter the ID and number, and then press [] (Log In/Out).
3
Select <TCP/IP Settings> using [] or [], and then press [OK].
4
Select <IPv4 Settings> using [] or [], and then press [OK].
5
Select <IP Address Settings> using [] or [], and then press [OK].
6
Select the method for setting the IP address using [] or [].
<Auto Obtain>
Set the IP address using DHCP, BOOTP, RARP, or Auto IP.
<Manual Obtain>
Manually assign an IP address for the machine.
This setting can be specified only when <Select Protocol> and <Auto IP> in <Auto Obtain> are set to <Off>.
7
Change the IP address settings.
When <Auto Obtain> is selected
When <Manual Obtain> is selected
When <Auto Obtain> is selected
(1)
Change <Auto Obtain> settings.
<Select Protocol>
<Off>
Do not obtain an IP address automatically.
<DHCP>
Obtain an IP address automatically using DHCP. (The DHCP server needs to be running.)
<BOOTP>
Obtain an IP address automatically using BOOTP. (The BOOTP daemon needs to be running.)
<RARP>
Obtain an IP address automatically using RARP. (The RARP daemon needs to be running.)
<Auto IP>
<Off>
Do not obtain an IP address automatically.
<On>
Obtain an IP address automatically.
(2)
Select <Apply> using [] or [], and then press [OK].
When <Manual Obtain> is selected
This setting can be specified only when <Select Protocol> and <Auto IP> in <Auto Obtain> are set to <Off>.
(1)
Enter the IP address.
After it has been entered, press [OK].
(2)
Enter the subnet mask.
After it has been entered, press [OK].
(3)
Enter the gateway address.
After it has been entered, press [OK].
8
Press [] (Menu) to close the menu screen.
9
Restart the machine.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.