Checking the Network Connection
Make sure that the network settings are correctly specified.
1
Press [
![](./images/book_images/pubnumbers/USRMA-0150-00/b_key_menu.gif)
] (Menu).
2
Select <Network Settings> using [
![](./images/book_images/pubnumbers/USRMA-0150-00/b_key_up.gif)
] or [
![](./images/book_images/pubnumbers/USRMA-0150-00/b_key_down.gif)
], and then press [OK].
When the system manager ID and system manager PIN are specified
Use the numeric keys to enter the ID and number, and then press [
![](./images/book_images/pubnumbers/USRMA-0150-00/b_key_log.gif)
] (Log In/Out).
3
Select <TCP/IP Settings> using [
![](./images/book_images/pubnumbers/USRMA-0150-00/b_key_up.gif)
] or [
![](./images/book_images/pubnumbers/USRMA-0150-00/b_key_down.gif)
], and then press [OK].
4
Select <IPv4 Settings> using [
![](./images/book_images/pubnumbers/USRMA-0150-00/b_key_up.gif)
] or [
![](./images/book_images/pubnumbers/USRMA-0150-00/b_key_down.gif)
], and then press [OK].
5
Select <PING Command> using [
![](./images/book_images/pubnumbers/USRMA-0150-00/b_key_up.gif)
] or [
![](./images/book_images/pubnumbers/USRMA-0150-00/b_key_down.gif)
], and then press [OK].
6
Enter an arbitrary IPv4 address existing on the network.
After it has been entered, press [OK].
7
Check the response.
When the network connection is confirmed
<Received response from host.> is displayed.
When the network connection is not confirmed
<No response from host.> is displayed. Recheck your network settings.
8
Press [
![](./images/book_images/pubnumbers/USRMA-0150-00/b_key_menu.gif)
] (Menu) to close the menu screen.