Fax Settings 

You can register the fax number of the machine.

See the Starter Guide.

Select a line type.

Specify whether to sound an alarm when the telephone handset is left unhooked and adjust the volume.

You can register scan settings for documents.

Register your name or company's name (sender's name).

See the Starter Guide.

You can specify whether to use ECM.

You can specify the number of seconds for the pause time.

You can specify whether to redial when fax documents cannot be sent.

You can specify the number of times to redial.

You can specify the interval between redials.

You can specify whether to redial when a send error occurs.

The sender ID is printed at the top of each page that you are sending, along with the fax number and sender's name. This helps the recipient to identify the sender.

Select the location where the Sender ID is printed.

Select the text to add in front of the number.

You can specify whether to dial after checking the dial tone when sending fax documents.

You can specify whether to use ECM.

Set whether or not to ring the external telephone when <RX Mode> is set to <Auto> or <Fax/Tel Auto Switch>.

You can specify whether to use the "remote receiving function" enabling you to receive fax documents by dialing an ID number even in the middle of a telephone call.

Set the incoming call ring time before the machine switches to the fax mode automatically. This option can be enabled when the <RX Mode> is set to <Manual>.

Enable this option to print on both sides of paper. This saves excessive paper consumption.

You can reduce the size of received documents and print them.

You can specify whether to print information such as reception date when printing received documents.

Specify whether to continue printing received documents when the toner is nearly empty.