Checking the Network Connection
|
Before checking the network connection, see "Attention (Checking the Network Connection)."
|
Make sure that the network settings are correctly specified.
1
Press [
] (Menu).
] (Menu).2
Select <Network Settings> using [
] or [
], and then press [OK].
] or [], and then press [OK].
When the system manager ID and system manager PIN are specified
Use the numeric keys to enter the ID and number, and then press [
] (Log In/Out).
] (Log In/Out).
3
Select <TCP/IP Settings> using [] or [], and then press [OK].
] or [], and then press [OK].
4
Select <IPv4 Settings> using [] or [], and then press [OK].
] or [], and then press [OK].
5
Select <PING Command> using [] or [], and then press [OK].
] or [], and then press [OK].
6
Enter an arbitrary IPv4 address existing on the network.
After it has been entered, press [OK].
7
Check the response.
When the network connection is confirmed
<Received response from host.> is displayed.
When the network connection is not confirmed
<No response from host.> is displayed. Recheck your network settings.
8
Press [] (Menu) to close the menu screen.
] (Menu) to close the menu screen.