Setting the Permission for HTTP Communications
Specify whether to use HTTP communications (a Web browser to access the Remote UI).
|
IMPORTANT
|
When the setup is completeRestart the machine to take effect the settings.
|
1
Press [
] (Menu).
] (Menu).2
Select <Network Settings> using [
] or [
] and press [OK].
] or [] and press [OK].
When the system manager ID and system manager PIN are specified
Use the numeric keys to enter the ID and number, and then press [
] (Log In/Out).
] (Log In/Out).
3
Select <TCP/IP Settings> using [] or [] and press [OK].
] or [] and press [OK].
4
Select <Use HTTP> using [] or [] and press [OK].
] or [] and press [OK].
5
Select <Off> or <On> using [] or [] and press [OK].
] or [] and press [OK].
|
<Off>
|
Disallow HTTP communications.
|
|
<On>
|
Allow HTTP communications.
|
6
Press [] (Menu) to close the menu screen.
] (Menu) to close the menu screen.7
Restart the machine.
It is necessary to restart the machine to take effect the settings.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.