Paper Curls

Try one of the following to solve the problem.

<Cause 1> Damp paper is used.

Solution 1
Replace the paper stack with new unopened one.
"Supported Paper Types"
Solution 2
Follow the steps in the procedure below when plain paper (60 to 89 g/m²)is loaded.
1.
Access the [Page Setup] tab.
2.
Set [Paper Type] to [Plain Paper L].
Solution 3
Change the <Special Mode V> setting from the operation panel.
"Special Mode"
The effect becomes greater as the number goes up.
<Off> -> <Mode 1> -> <Mode 2>
(low)                                                   (high)
Paper curls and creases can be minimized by changing the paper type and usage conditions, without needing to change the setting.
The more effective the setting becomes, the slower the print speed.

<Cause 2> The paper type loaded is not appropriate.

Solution
Make sure that the number of sheets or the paper type loaded in the paper drawer or multi-purpose tray meets the paper specifications.
"Supported Paper Types"
02YL-0LH