Attention (Cleaning the Machine)
|
See "Maintenance and Inspections" in "Important Safety Instructions."
|
Before cleaning the machine, note the following.
Make sure that no jobs are stored in memory before turning OFF the power switch and disconnecting the power cord.
Use a soft cloth to avoid scratching the components.
Do not clean the machine components with tissue paper, paper towels, or similar materials. These materials tend to stick to the components or generate static charges.
 CAUTION |
Precautions to take when cleaning the feederDo not dampen the cloth too much, as this may tear the document or damage the machine.
Precautions to take when closing the feederBe careful not to get your fingers caught.
Precautions to take when you get toner onto your hands or into clothingIf toner comes in contact with your hands or clothing, wash them immediately in cold water. Do not use warm water, as it will set the toner and make it difficult to remove the toner stains.
|
|
NOTE
|
About sending or receiving faxesWhen the power plug is unplugged, the machine cannot send or receive faxes.
|
When a job is waiting to be printedThe job is deleted when you turn OFF the power switch.
|
About jobs stored in memoryJobs can be stored in memory for approximately an hour after the power plug has been unplugged. To view jobs stored in memory, see the following.
|