Timer Settings

NOTE
About the menu options in the following chart
Default settings are highlighted in bold.
The settings marked with*A cannot be imported or exported via the Remote UI.
For values with "*1" mark, the default value varies depending on the country where you are using the machine.
For settings or values with "*2" mark, the setting or value may be unavailable or vary depending on the country where you are using the machine.

Time & Date Settings

Settings
Descriptions
Date Display Type
Select the date display format.
YYYY MM/DD, MM/DD/YYYY, DD/MM YYYY
"Setting the Current Date and Time"
12/24 Hour Clock
Select the time display format.
12 Hour (AM/PM), 24 Hour
"Setting the Current Date and Time"
Current Time Settings*A
Specifies the current time and date.
"Setting the Current Date and Time"
Time Zone Settings
Set the time zone.
GMT-12:00 to GMT 0:00 to GMT+12:00
"Setting the Current Date and Time"
Daylight Savings*2
Set the daylight savings time option.
Off*1
On: Start (M/W/D), End (M/W/D)
"Setting the Current Date and Time"

Sleep Timer

Set a timer to enter the sleep mode after the machine has been idle for a specified length of time.
We recommend that the default settings be used for this feature.
3 to 5 to 240 (minutes)
"Setting the Sleep Timer"

Auto Reset Timer

Set a timer to return to the default screen after copying is completed or when key operation is not performed for a certain period of time.
0 (Off), 1 to 2 to 9 (minutes)
"Setting the Auto Reset Timer"

Screen After Auto Reset

Specify whether to display the default screen selected in "Setting the Default Screen" after auto reset is performed.
Default Screen, Selected Screen
"Specifying the Screen that Is Displayed after Auto Reset Is Performed"

Auto Offline Time

Specify a timer to return to the scanner offline mode after the machine has been idle for a specified length of time.
0 (Off), 1 to 5 to 60 (minutes)
"Setting the Auto Offline Time"
02YL-0JH