Switching On/Off for IEEE802.1X Authentication
You can switch On/Off of IEEE802.1X authentication on the operation panel as well.
|
IMPORTANT
|
When the setup is completeRestart the machine to take effect the settings.
|
To use IEEE802.1X authenticationYou need to specify its authentication information via Remote UI in advance.
|
1
Press [
] (Menu).
] (Menu).2
Select <Network Settings> using [
] or [
] and press [OK].
] or [] and press [OK].
When the system manager ID and system manager PIN are specified
Use the numeric keys to enter the ID and number, and then press [
] (Log In/Out).
] (Log In/Out).
3
Select <IEEE802.1X Settings> using [] or [] and press [OK].
] or [] and press [OK].
4
Select <Off> or <On> using [] or [] and press [OK].
] or [] and press [OK].
|
<Off>
|
IEEE802.1X authentication is not available.
|
|
<On>
|
IEEE802.1X authentication is available.
|
5
Press [] (Menu) to close the menu screen.
] (Menu) to close the menu screen.6
Restart the machine.
It is necessary to restart the machine to take effect the settings.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.