Setting the Permission for HTTP Communications

Specify whether to use HTTP communications (a Web browser to access the Remote UI).
IMPORTANT
When the setup is complete
Restart the machine to take effect the settings.
1
Press [] (Menu).
2
Select <Network Settings> using [] or [] and press [OK].
When the system manager ID and system manager PIN are specified
Use the numeric keys to enter the ID and number, and then press [] (Log In/Out).
3
Select <TCP/IP Settings> using [] or [] and press [OK].
4
Select <Use HTTP> using [] or [] and press [OK].
5
Select <Off> or <On> using [] or [] and press [OK].
<Off>
Disallow HTTP communications.
<On>
Allow HTTP communications.
6
Press [] (Menu) to close the menu screen.
7
Restart the machine.
It is necessary to restart the machine to take effect the settings.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.
02EU-0K8