|
NOTE
|
About the menu options in the following chartDefault settings are highlighted in bold.
For values with "*1" mark, the default value varies depending on the country where you are using the machine.
The setting marked with "*2" is only for D1370/D1350.
|
|
Settings
|
Descriptions
|
|
|
Fax Tone*2
|
Adjust the sound volume during a fax transmission.
|
|
|
Ring Tone*2
|
Adjust the ring volume when receiving a fax.
|
|
|
TX Done Tone*2
|
Adjust the fax sound volume when sending is complete.
|
|
|
RX Done Tone*2
|
Adjust the fax sound volume when receiving is complete.
|
|
|
Scanning Done Tone*2
|
Adjust the fax sound volume when scanning is complete.
|
|
|
Entry Tone
|
Specify whether or not the machine makes a sound when a key on the operation panel is pressed.
|
|
|
Invalid Entry Tone
|
Specify whether or not the machine makes a sound when an invalid key is pressed.
|
|
|
Restock Supplies Tone
|
Specifies whether or not the machine makes a sound when a toner cartridge is almost empty.
|
|
|
Warning Tone
|
Specify whether or not the machine makes a sound when unexpected events occur, such as paper jams or improper operations.
|
|
|
Job Done Tone
|
Specifies whether the machine makes a sound when a job other than faxing is completed.
Specify the job done tone in <TX Done Tone> and <RX Done Tone>.
|
|
|
Energy Saver Alert
|
Specifies whether the machine makes a sound it is in Energy Saver mode.
|
|
Settings
|
Descriptions
|
|
|
Select Default Screen
|
Select the default screen displayed when the machine is turned ON or after auto reset is performed.
|
|
|
Language
|
Select the display language for the machine.
|
|
|
Remote UI Language
|
Select the display language for the Remote UI:
|
|
|
Brightness
|
Adjusts the brightness of the display.
|
|
|
Contrast
|
Adjust the display contrast:
|
|
|
Invert Screen Colors
|
When <On> is selected, the colors of the display are inverted.
Select <On> in case you have difficulty viewing the display.
|
|
|
mm/Inch Entry Switch
|
Set the unit of measurement for the paper size.
|
|
|
Gram/Pound Switch
|
Set a unit of measure for paper weight.
|
|
|
Message Display Time
|
Set the duration during which each message is displayed on the screen.
|
|
|
Scrolling Speed
|
Adjust the speed to scroll the menu when all the menu items cannot be shown on the screen.
|
|
|
Cursor Movement*1
|
When entering characters, specifies whether to move the cursor to automatically to the next field.
|