Attention (Installing the Laser MFP Drivers and MF Toolbox)

IMPORTANT
Necessary system environment to use each type of software "Selecting the method for connecting to the machine"
User rights for logging on to Windows Log on to your computer with administrator privileges.
To install via a USB cable Connect the USB cable after software installation is complete. Make sure that the machine is powered ON before connecting the USB cable.
To install via a network connection Check the following before installing the Laser MFP Drivers. The computer and machine are connected over the network. "Selecting the method for connecting to the machine" The machine is powered ON. "Turning On the Machine and Specifying the Initial Settings" The IP addresses are properly set up. "Checking IP Address Settings"

Log on to your computer with administrator privileges.

Connect the USB cable after software installation is complete.
Make sure that the machine is powered ON before connecting the USB cable.

Check the following before installing the Laser MFP Drivers.

The computer and machine are connected over the network.

The machine is powered ON.

The IP addresses are properly set up.