Configuring Port Settings over a TCP/IP Connection
Configure port settings on your computer to print to the machine.
|
Configure port settings on your computer when:
|
Steps to take
|
|
Installing the printer driver using [Add
Printer]. |
Note that a different IP address is assigned to the installed printer driver. To use the IP address of the machine, configure port settings on your computer after installation.
|
|
Changing the IP address of the machine.
|
Configure port settings on your computer to use the IP address of the machine.
|
|
NOTE
|
The dialog box that appears on your computerThe dialog box may vary slightly, depending on the version of your operating system.
|
1
Open the printer folder.
2
Right-click the icon for the machine and select [Printer properties] (or [Properties]).
3
Click the [Ports] tab.
4
Click [Add Port].
5
Select [Canon MFNP Port] for [Available port types] and click [New Port].
6
Click [Auto Detect].
 When you cannot perform Auto Detect |
|
Enter the IP address or MAC address of the machine manually.
 You can check the IP address of the machine in "Checking IP Address Settings."
You can check the MAC address of the machine in "Checking the MAC Address."
|
7
Select the detected printer and click [Next].
8
Click [Add].
9
Click [Finish].
10
Click [Close].
11
Click [Apply].