Service Call Message
If a malfunction occurs and the machine cannot operate normally, the message <Turn the main power ON. If problem persists contact dealer or service rep.> is displayed. Write down the error code displayed on the bottom left side of the display and contact your local authorized Canon dealer.
 WARNING |
|
Do not connect or disconnect the power cord with wet hands, as this may result in electrical shock.
|
 CAUTION |
|
Always grasp the power plug portion when disconnecting the power cord. Pulling on the power cord may expose or snap the core wire, or otherwise damage the power cord. If the power cord is damaged, this could cause an electricity leak and result in a fire or electrical shock.
|
|
NOTE
|
|
Sending or receiving documents cannot be done when the main power switch is OFF or the power cord is disconnected.
If the main power switch is turned OFF, all jobs waiting in the print queue will be erased.
Documents received into memory and documents stored for delayed send will be retained for approximately 5 minutes after the power cord has been disconnected.
|
1
Turn OFF the main power switch. Wait at least 10 seconds before turning the main power
switch back ON.
switch back ON.
2
If the machine still does not operate normally, turn OFF the main power and disconnect the power plug. And then contact your local authorized Canon dealer.
Turn OFF the main power.
Disconnect the power plug.
|
NOTE
|
When you contact your local authorized Canon dealer, have the following information available:Product name (imageRUNNER 1133iF/imageRUNNER 1133A/imageRUNNER 1133)
Serial number (a character string of 3 letters and a 5-digit number; located on the rating label on the rear side of the machine or on the label on inside of the machine's front cover)
 Details of the malfunction
The error code displayed on the touch panel display
|