Cleaning the Feeder (iR 1133iF/iR 1133A Only)
|
See "Attention (Cleaning the Machine)" in advance.
|
If your document has black streaks or appears dirty after it has been scanned from the feeder, the rollers inside the feeder may be dirty. Clean the feeder's scanning area and rollers.
1
Turn OFF the power switch and disconnect the power cord.
2
Open the feeder cover.
3
Clean the rollers (A) inside the feeder with a well wrung out cloth dampened with water and wipe them with a soft, dry cloth.
4
Close the feeder cover.
5
Wipe the scanning area (A) of the platen glass.
|
(1)
|
Wipe with a well wrung out cloth dampened with water.
|
|
(2)
|
Wipe with a soft, dry cloth.
|
|
IMPORTANT
|
Precaution when cleaning the platen glassTake care not to bend the clear sheet (A) at the left edge of the platen glass.
 |
6
Close the feeder.
7
Connect the power cord and turn ON the power switch.