Carrying the Machine to the Installation Location and Removing the Packing Materials
|
See "Attention (Carrying the Machine and Packing Materials)" in advance.
|
Carry the machine to the installation site and remove the packing materials. For information on the installation space, see "Installation and Handling."
1
Take the machine out of the plastic bag, and then carry the machine to the installation site.
 |
 |
 |
2
Remove the tape (3 locations).
3
Remove the packing material.
 |
|
 |
4
Remove the tape.
There is tape on 2 locations on MF4890dw/MF4880dw.
There is tape on 1 location on MF4770n.
MF4890dw/MF4880dw |
 |
MF4770n |
 |
|
 |
5
Remove the tape while opening the paper cassette.
6
Open the feeder.
7
Remove the packing material with tape.
|
Check!
|
To remove the packing materials:Make sure that the following packing materials are all removed from the machine.
|
|
|
8
Gently close the feeder.
|
Continue with the steps in the procedure below and remove the packing materials from the toner cartridge.
 "Preparing to Use the Toner Cartridge" |