Initializing the System Settings
This section describes how to restore the following System Settings to their default settings:
Network Settings
System Manager Information Settings
Device Information Settings
Communication Management Settings
Remote UI On/Off
Restrict TX Function
Display Job History
USB Device On/Off
Select PDL (Plug-n-Play)
All settings mentioned above
1
Press [
] (Menu).
] (Menu).2
Press [
] or [
] to highlight <System Settings>, and then press [OK].
] or [] to highlight <System Settings>, and then press [OK].
If a System Manager PIN is specified:
Use the numeric keys to enter the System Manager PIN, and then press [OK].
3
Press [] or [] to highlight <Initialize System Settings>, and then press [OK].
] or [] to highlight <Initialize System Settings>, and then press [OK].
4
Press [] or [] to highlight the setting you want to initialize, and then press [OK].
] or [] to highlight the setting you want to initialize, and then press [OK].
5
Press [
] to highlight <Yes>, and then press [OK].
] to highlight <Yes>, and then press [OK].Initializing is performed.
6
Press [] (Menu) to close the Menu screen.
] (Menu) to close the Menu screen.