Basic Copy Operations

1
Place documents.
MF4890dw
Up to 50 documents can be loaded into the feeder.
MF4880dw/MF4770n
Up to 35 documents can be loaded into the feeder.
2
Press [] (COPY) to switch to the Copy mode screen.
The Copy mode screen appears.
3
Specify the copy settings as needed.
NOTE
Copy Settings:
The settings specified here are effective only for the current operation. To make the settings effective for all the copy operations, see "Changing the Default Settings."
4
Enter the copy quantity (1 to 99) using numeric keys.
Press [] (Clear) to cancel the entered quantity.
5
Press [] (Start).
Copying starts.
 If <Incorrect Size/Setting> appears:
Change the <Paper Settings> menu properly or load the paper size specified in the <Paper Settings> menu.
 If <Memory is full. Scanning canceled. Print?> appears:
Either print all pages that were successfully scanned or cancel the job.
IMPORTANT
To copy a document without margins:
The image may be partially cut off on the output. For more information on the scanning area, see "Scan Area."
0AE1-058