Copying by Saving Paper

Press [] (Paper Save Copy) to save paper when making a copy.
Choose one of the following four combinations of 2 on 1/4 on 1 and 2-Sided*copy settings, as shown in the table below.
 
N on 1
2-Sided
Select Layout
Format Settings
Original Orientation
Original Format
2 on 1 1->2-Sided*
1->2-Sided
Portrait
Book Type
4 on 1 1->2-Sided*
1->2-Sided
Portrait
Book Type
2 on 1 1->1-Sided
OFF
4 on 1 1->1-Sided
OFF
*
For MF4890dw/MF4880dw only
IMPORTANT
Precautions on 2-Sided Copying:
Do not touch your document when making 2-sided copying until the process is complete. After copying on the front side is complete, the document is partially output, reserved, and fed into the machine again for copying on the back side.
1
Place documents.
2
Press [] (Paper Save Copy).
3
Press [] or [] to highlight the combination that you want to use, and then press [OK].
4
Press [] or [] to highlight the document size, and then press [OK].
5
Press [] (Start).
When your document is placed on the platen glass:
(1)
Set the next page and press [] (Start).
*
Repeat this step until all pages are scanned.
(2)
Press [] or [] to highlight <Start Copying>, and then press [OK].
0AE1-05X