Checking the Network Connection

Before confirming the network connection, see "Attention (Checking the Network Connection)."
Make sure that the network settings are correctly specified.
1
Press [] (Menu).
2
Press [] or [] to highlight <Network Settings>, and then press [OK].
If a System Manager PIN is specified:
Use the numeric keys to enter the System Manager PIN, and then press [OK].
3
Press [] or [] to highlight <TCP/IP Settings>, and then press [OK].
4
Press [] or [] to highlight <IPv4 Settings>, and then press [OK].
5
Press [] or [] to highlight <PING Command>, and then press [OK].
6
Enter an arbitrary IPv4 address existing on the network.
After it has been entered, press [OK].
7
Confirm the response.
If the network connection is confirmed:
The message <Received response from host.> will be displayed.
If the network connection is not confirmed:
The message <No response from host.> will be displayed. Recheck your network settings.
8
Press [] (Menu) to close the Menu screen.
0AE1-0E6