Configuring the Remote UI
Specify whether or not to use the Remote UI function. The Remote UI allows you to access the machine and change settings via a networked computer.
|
IMPORTANT
|
When the setup is complete:You must restart the machine to activate these settings.
|
1
Press [
] (Menu).
] (Menu).2
Press [
] or [
] to highlight <System Settings>, and then press [OK].
] or [] to highlight <System Settings>, and then press [OK].
If a System Manager PIN is specified:
Use the numeric keys to enter the System Manager PIN, and then press [OK].
3
Press [] or [] to highlight <Remote UI On/Off>, and then press [OK].
] or [] to highlight <Remote UI On/Off>, and then press [OK].
4
Press [] or [] to highlight <Off> or <On>, and then press [OK].
] or [] to highlight <Off> or <On>, and then press [OK].
|
<Off>
|
Disables the Remote UI function.
|
|
<On>
|
Enables the Remote UI function.
|
5
Press [] (Menu) to close the Menu screen.
] (Menu) to close the Menu screen.6
Restart the machine.
It is necessary to restart the machine to take effect the settings.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.