Setting the Permission for HTTP Communication
Specify when using HTTP communication (Web browser (Remote UI)).
|
IMPORTANT
|
When the setup is complete:Restart the machine to activate these settings.
|
1
Press [
] (Menu).
] (Menu).2
Press [
] or [
] to highlight <Network Settings>, and then press [OK].
] or [] to highlight <Network Settings>, and then press [OK].
If a System Manager PIN is specified:
Use the numeric keys to enter the System Manager PIN, and then press [OK].
3
Press [] or [] to highlight <TCP/IP Settings>, and then press [OK].
] or [] to highlight <TCP/IP Settings>, and then press [OK].
4
Press [] or [] to highlight <Use HTTP>, and then press [OK].
] or [] to highlight <Use HTTP>, and then press [OK].
5
Press [] or [] to highlight <Off> or <On>, and then press [OK].
] or [] to highlight <Off> or <On>, and then press [OK].
|
<Off>
|
Prevents HTTP communication.
|
|
<On>
|
Allows HTTP communication.
|
6
Press [] (Menu) to close the Menu screen.
] (Menu) to close the Menu screen.7
Restart the machine.
It is necessary to restart the machine to take effect the settings.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.