Fax TX Settings 

NOTE
Menu options in the following chart:
Default settings are highlighted in bold.

Basic Settings

Settings
Descriptions
Register Unit Telephone Number
Set a fax number for the machine:
Register Unit Name
Set your name or your company's name as the machine name (sender's name):
Select Line Type
Select a line type:
Pulse, Tone
Public Line Connection
If the external telephone does not ring or you cannot make a call using the external telephone when the fax receive mode is set to <Fax/Tel Auto Switch>, set <Public Line Connection> settings to <Adapter 1> or <Adapter 2>:
Direct, Adapter 1, Adapter 2
Off-Hook Alarm
Set whether or not to sound an alarm when the telephone handset is off the hook and adjust the volume:
Off
On:
Off-Hook Alarm Volume: 1 to 5

TX Function Settings

Settings
Descriptions
Change Defaults
Store new transmission settings:
ECM TX
Set whether or not to use the electronic correction mode:
Off, On
Pause Time
Set a duration for pauses added to fax numbers:
1 to 2 to 15 (sec.)
Auto Redial
Set whether or not to automatically redial unconnected fax numbers:
Off, On
Redial Times
Set the number of times to redial:
1 to 2 to 10 (times)
Redial Interval
Set the interval between redials:
2 to 99 (min.)
Redial When Err Occurs
Set whether or not to redial when a send error occurs:
Off, On
Sender ID
Set whether or not to add sender information to faxes. This helps the recipient to identify the sender:
Off, On
Print Location
Select the location where the Sender ID is printed:
On Image, Above Image
Mark No. as
Select the text to add in front on the number:
FAX, TEL
Check Dial Tone Before Sending
Set whether or not verify a dial tone before dialing fax numbers:
Off, On

Fax Setup Guide

Specify initial fax settings and connect the telephone cable.
0AE1-0HX