Fax RX Settings 

NOTE
Menu options in the following chart:
Default settings are highlighted in bold.
The setting marked with "*" is only for MF4890dw/MF4880dw.

RX Function Settings

Settings
Descriptions
ECM RX
Set whether or not to use the electronic correction mode:
Off, On
"ECM RX"
Incoming Ring
Set whether or not to ring the external telephone  when <RX Mode> is set to <Auto> or <Fax/Tel Auto Switch>:
Off
On:
Ring Times: 1 to 2 to 99 (times)
"Incoming Ring"
Remote RX
Set whether or not to use the "remote receiving function" enabling you to receive fax documents by dialing an ID number even in the middle of a telephone call:
Off
On:
Remote RX ID: 00 to 25 to 99
"Remote RX"
Switch to Auto RX
Set the incoming call ring time before the machine switches to the fax mode automatically. This option can be enabled when the <RX Mode> is set to <Manual>:
Off
On:
Ring Time till Auto RX: 1 to 15 to 99 (sec.)
"Switch to Auto RX"

RX Print Settings

Settings
Descriptions
2-Sided Printing*
Set whether or not to print documents on both sides of the paper. This enables you to save paper:
Off, On
"2-Sided Printing (MF4890dw/MF4880dw Only)"
Reduce RX Size
Set an automatic reduction rate for printing received faxes:
Off
On:
Reduction Ratio: Auto, 97, 95, 90, 75 (%)
Reduction Direction: Vertical/Horizontal, Vertical Only
"Reduce RX Size"
RX Page Footer
Set whether or not to include a footer on received faxes:
Off, On
"RX Page Footer"
Continue Print. When Toner Is Nearly Out
Set whether or not to continue printing when toner is low:
Off, On
"Continue Print. When Toner Is Nearly Out"
 
0AE1-0HY