Copying an ID Card
|
Before copying an ID card, see "Attention (ID Card Copy)."
|
You can make a copy of a 2-sided card onto one side of a paper.
1
Place a card on the platen glass, and then close the feeder.
Place the card at the left edge of the platen glass, with a 5 mm space created.
To place the card horizontally |
 |
To place the card vertically |
 |
2
Display the Copy mode screen.
For MF4890dw/MF4870dn/MF4780w/MF4750:
Press [
] (COPY) to switch to the Copy mode screen.
] (COPY) to switch to the Copy mode screen.For MF4730:
Press [
] (COPY/SCAN) to switch to the Copy mode screen.
] (COPY/SCAN) to switch to the Copy mode screen.3
Press [
] or [
] to highlight <N on 1>, and then press [OK].
] or [] to highlight <N on 1>, and then press [OK].
4
Press [] or [] to highlight <ID Card Copy>, and then press [OK].
] or [] to highlight <ID Card Copy>, and then press [OK].
5
Press [
] (Start).
] (Start).After scanning the document completely, proceed to the next step.
6
Turn and place the card.
Place the card at the left edge of the platen glass, with a 5 mm space created.
To place the card horizontally |
 |
To place the card vertically |
 |
7
Press [] (Start).
] (Start).