In the Multi-Purpose Tray

Before loading paper in the multi-purpose tray, see "Attention (Loading Paper)."
Use the multi-purpose tray when you want to copy or print on a paper that is different from what is in the paper cassette.
You can load a single sheet of paper in the multi-purpose tray. 
1
Spread the paper guides a little wider than the paper.
2
Gently insert the paper into the multi-purpose tray with the print side face up.
Ensure that the paper stack does not exceed the load limit guides (A).
When loading envelopes
(1)
Fold the envelope flap.
(2)
Loosen any stiff corners of the envelope and flatten curls as shown in the figure.
(3)
Gently insert the envelope into the multi-purpose tray with the print side face up.
3
Adjust the paper guides tightly to the width of the paper.
IMPORTANT
Adjust the paper guides to the paper width without space.
If the paper guides are too loose or too tight, this may result in misfeeds or paper jams.
4
Push the output tray extension, and then pull it out.
5
Lift the paper stopper.
6
Specify the loaded paper size and type.
0880-01L