Setting the Print Port Number
Depending on your network environment, you can change the port number for each protocol.
|
IMPORTANT
|
When the setup is complete:Restart the machine to activate these settings.
|
1
Press [
] (Menu).
] (Menu).2
Press [
] or [
] to highlight <Network Settings>, and then press [OK].
] or [] to highlight <Network Settings>, and then press [OK].
If a System Manager PIN is specified:
Use the numeric keys to enter the System Manager PIN, and then press [OK].
3
Press [] or [] to highlight <TCP/IP Settings>, and then press [OK].
] or [] to highlight <TCP/IP Settings>, and then press [OK].
4
Press [] or [] to highlight <Port Number Settings>, and then press [OK].
] or [] to highlight <Port Number Settings>, and then press [OK].
5
Press [] or [] to highlight a protocol for which you want to change the port number, and then press [OK].
] or [] to highlight a protocol for which you want to change the port number, and then press [OK].
6
Enter the port number.
When you are finished entering, press [] or [] to highlight <Apply>, and then press [OK].
] or [] to highlight <Apply>, and then press [OK].
7
Press [] (Menu) to close the Menu screen.
] (Menu) to close the Menu screen.8
Restart the machine.
It is necessary to restart the machine to take effect the settings.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.