In the Multi-Purpose Tray
|
Before loading paper in the multi-purpose tray, see "Attention (Loading Paper)."
|
Use the multi-purpose tray when you want to copy or print on a paper that is different from what is in the paper cassette.
You can load a single sheet of paper in the multi-purpose tray.
1
Open the front cover and the lower front cover.
2
Push down and lower the multi-purpose tray.
3
Spread the paper guides a little wider than the paper.
4
Gently insert the paper into the multi-purpose tray with the print side face up.
Ensure that the paper stack does not exceed the load limit guides (A).
When loading envelopes
|
(1)
|
Fold the envelope flap.
 |
|
(2)
|
Loosen any stiff corners of the envelope and flatten curls as shown in the figure.
 |
|
(3)
|
Gently insert the envelope into the multi-purpose tray with the print side face up.
|
5
Adjust the paper guides tightly to the width of the paper.
|
IMPORTANT
|
Adjust the paper guides to the paper width without space.If the paper guides are too loose or too tight, this may result in misfeeds or paper jams.
 |
6
Lift the paper stopper.
7
Specify the loaded paper size and type.