Cleaning the Feeder (D560 Only)
|
See "Attention (Cleaning the Machine)" in advance.
|
If your document has black streaks or appears dirty after it has been scanned from the feeder, the rollers inside the feeder may be dirty. Clean the feeder's scanning area and rollers.
1
Turn OFF the power switch, and then disconnect the power cord.
2
Open the feeder cover.
3
Clean the rollers (A) inside the feeder with a well wrung out cloth dampened with water and wipe them with a soft, dry cloth.
4
Close the feeder cover.
5
Connect the power cord, and then turn ON the power switch.