After loading paper, connect the handset to the machine. The handset can be installed on the left side of the machine.
Connecting the Handset
1
Remove the covers (2 locations).
 If you cannot remove the covers: |
|
Use a flat-head screwdriver to remove the covers.
Be careful when you use flat-head screwdriver to remove the covers as this may damage the machine.
|
2
Insert the pins in the holes in the cradle. Push the pins in only up to the first stop (A).
3
Align the pins with the holes in the machine and connect the cradle to the machine. Push the pins in only up to the first stop.
4
Push the pins to the end.
5
Place the handset on the cradle.
6
Connect the handset’s telephone line to the handset jack.
7
Attach the clamp to the machine.
8
Attach the handset’s telephone line and close the clamp.
|
Continued with the steps in the procedure below to connect the power cord.
|