Paper Curls

Try one of the following to solve the problem.

<Cause 1> Damp paper is used.

Solution 1
Replace the paper with new paper in an unopened package.
Solution 2
Follow the procedures below when plain paper (16 lb Bond to 24 lb Bond (60 g/m² to 90 g/m²)) is loaded.
1.
Display the [Page Setup] tab.
2.
Set [Paper Type] to [Plain Paper L].
Solution 3
Change the <Special Mode V> setting from the operation panel.

<Cause 2> The paper type loaded is not appropriate.

Solution
Make sure that the number and type of the paper loaded in the paper cassette meets the paper requirements.
0AE3-0C6