Functions Which Can Be Specified from the Control Panel

This printer allows you to specify the printing functions from the printer driver. However, some printing functions are specified from the control panel or the Remote UI. The following table shows the functions to be specified from the control panel or the Remote UI.
For details on the items you can manage using the control panel, see "Setting Items."

Function	Overview of the Function
Multi-purpose tray paper size	Specifies the size of the paper loaded in the multi-purpose tray. "[Setup] Menu ([Paper Source] Options)" "[Select Feeder] Menu"
Multi-purpose tray priority	Specifies whether the printer should detect the paper source in order starting with the multi-purpose tray. "[Setup] Menu ([Paper Source] Options)" "[Select Feeder] Menu"
Drawer N (N = 1, 2) size	Specifies the size of the paper loaded in the paper drawer (Drawer 1 or 2). "[Setup] Menu ([Paper Source] Options)" "[Select Feeder] Menu"
Standard paper size	Since paper size cannot be specified when printing from DOS, UNIX or other operating system, specify it using this setting. "[Setup] Menu ([Paper Source] Options)" "[Select Feeder] Menu"
Invalid paper tray	Specifies what the printer does when paper that is the same size as the paper size of the received data is not loaded in the selected paper source. "[Setup] Menu ([Paper Source] Options)" "[Select Feeder] Menu"
Auto selection	Specifies the paper source to be automatically selected. "[Setup] Menu ([Paper Source] Options)" "[Select Feeder] Menu"
Default paper type	Since paper type cannot be specified when printing from DOS, UNIX or other operating system, specify it using this setting. "[Setup] Menu ([Paper Source] Options)" "[Select Feeder] Menu"
Adjust start position (Offset X, Offset Y)	Adjusts the printing position in the vertical direction (Y) or the horizontal direction (X). "[Setup] Menu ([Layout] Options)" "[Setup] Menu ([User Maintenance] Options)"
Alternative method	If the last page for the 2-sided printing is 1-sided printing, 1-sided printing is applied to the last page. "[Setup] Menu ([Layout] Options)"
Toner volume correction	Set the correction method for when the toner volume has exceeded the printer's limit value when printing high density parts. "[Setup] Menu ([Quality] Options)"
Reduce quality	Specifies whether the printer should continue printing with the image quality of the data being lowered automatically or stop printing displaying an error message when the memory required for the process runs out. "[Setup] Menu ([Quality] Options)"
Recovery printing	Specifies whether to print the partially printed page when the printer stops printing due to a paper jam or an error occurring. "[Setup] Menu ([User Maintenance] Options)"
Check paper size	Specifies whether the printer should stop printing, displaying the message <Check paper size.> or continue printing. "[Setup] Menu ([User Maintenance] Options)"
Substitute size	The printer switches the paper size if the paper of the size to be used is not loaded in the printer. "[Setup] Menu ([User Maintenance] Options)"
Curl correction	If printed plain paper curls, specify the setting for this item. "[Setup] Menu ([User Maintenance] Options)"
Special image mode	If the centers of dense text or lines are not being printed, specify the setting for this item. "[Setup] Menu ([User Maintenance] Options)"
Smooth plain paper	If plain paper with a smooth surface is used, the density may be low. In such a case, specify the setting for this item. "[Setup] Menu ([User Maintenance] Options)"
Paper save	Specifies whether the printer outputs the blank page that can be created due to no data existing in the page data sent from an application. "[Setup] Menu ([UFR II] Options)"