Setting the Printer to a Static IP Address

1
Press [  ] (Settings), select [Network] using [  ] or [  ], and then press [OK].
When the message appears, press [OK].
You can configure the settings, regardless of whether the printer is online (with the [  ] (Online) indicator turned on) or offline (with the [  ] (Online) indicator turned off).
2
Select [TCP/IP Settings] using [  ] or [  ], and then press [OK].
3
Select [IPv4 Settings] using [  ] or [  ], and then press [OK].
4
Enable [IPv4 Settings].
(1):
Select [IPv4] using [  ] or [  ], and then press [OK].
(2):
Select [On] using [  ] or [  ], and then press [OK].
5
Select how to configure the IP address.
(1):
Select [IP Mode] using [  ] or [  ], and then press [OK].
(2):
Select [Manual] using [  ] or [  ], and then press [OK].
6
Configure the IP address.
(1):
Select [IP Address Settings] using [  ] or [  ], and then press [OK].
(2):
Select [IP Address] using [  ] or [  ], and then press [OK].
(3):
Configure [IP Address].
NOTE
How to enter values in [IP Address]
1.
Move between the fields (four sets of up to three decimal numbers separated by periods) using [  ] or [  ] when entering the IP address you want to configure. (The values in the selected field start flashing for you to enter the address.)
2.
Enter the values. (Press [  ] to increase the value and press [  ] to decrease the value.)
3.
When you have finished entering all the values, press [OK] for the setting to take effect.
If you are not sure what to enter in [IP Address]:
If you are not sure what values you should enter for the IP address, contact your network administrator or see "Determining Which IP Address to Assign to the Printer" for more information.
7
Perform a hard reset or restart the printer.
The settings become effective after hard resetting or restarting the printer.
NOTE
About details of hard reset
094X-08E